 |
||||||||||
|
||||||||||
| Project Name | Supplies |
| POURING VESSEL
|
Tools: Bandsaw with a 1/8 inch blade and a 1/2”, 3 hook blade; lathe with a large 4-jawed chuck, spur and live centers, 1/2” or 5/8” bowl gouge, 3/8” spindle gouge, mini hook scraper, Trent Bosch or John Jordan 1/2” or 5/8” straight and hook scraper, Sorby rounded tear drop shear scraper; air compressor with air hose; magnetic shop lamp; and a 3” pneumatic drum sander. Supplies: A green log section, 12” to 14” diameter and 5” thick. 2-1/2” x 2-1/2” by 8” dry hardwood blank 1/8” x 5” x 8” hardboard or plywood for template masking tape rubber cement pencil or black marker 120, 180, 220, 320, 400 grit abrasive paper |
 |
|
| TURNING CUSTOM GAME CALLS FROM A KIT |
Required Materials: #3113 Duck Call Blank Kit (claro walnut) ($8.29), pre-drilled Duck Call Blanks only (osage orange ($7.89). #3026 Canada Goose Call ($7.29) #3000 Game Call Turning Kit ($6.49) #3004 Brass Band ($2.59 ea.) #0279 Game Call Mandrel System (MT2) ($18.99) or #278 (MT1) ($15.99) #0104 HUT Crystal Coat or similar friction finish ($10.99) #0107 HUT PPP Satin Gloss ($10.05) Choice of abrasives to 1200 grit |
|
|
| TURN-A-POT TOOL | Tools: Table saw, clamps, calipers, ruler, lathe with 4-jawed chuck and standard lathe centers, small parting tool, small spindle gouge, and a skew. Materials Needed: 1 piece, 2-1/2” x 2-1/2” x 5” long construction lumber or wood of choice. 1 piece, 1-1/2” x 3”diameter construction lumber or wood of choice. 1 piece, 3-1/2” x 16” strip of plain newspaper. Carpenter’s wood glue, 12” length of #12 copper wire (optional),masking tape, assorted grits of abrasive paper, paste wax or finish of choice, paper towel. |
|
|
| VICE-PRESIDENTIAL PEN WITH A CA FINISH |
Tools: Lathe with assorted turning tools Sources Of Supplies: Laser engraving by Kallenshaan Woods – www.kallenshaanwoods.com *Super T – Cyanoacrylate glue (HST-4) 2 oz. Bottle $9.95 |
|
|
| TURNING A ONE- PIECE DESK PEN | Tools: Lathe with a hollow cup center that has a 5/32” hole in the center* for the tailstock and a square driver that fits into the headstock, 3/4” spindle gouge, 1/4” spindle gouge, skew, wood rasp (When Dad makes the pen blank end too fat for the square drive, I have to rasp it to size.) variable speed drill, 5/32” x 12” aircraft drill bit**, #21 drill bit, power sanding mandrel, trim saw, and a buffing system. Materials: 1/2” x 8-1/2” pen blank, paraffin wax, Bic brand Round Stic or Cristal pens, 220, 320, 400 and 600 grit abrasive paper, polyurethane or finish of choice, brown Tripoli buffing compound, and Renaissance wax. Sources Of Supply: |
|
|
| LAMINATED LAZY SUSAN | Tools: Han plane or jointer and planer, table saw, clamps, compass, bandsaw, faceplate and mounting screws, screwdriver, Lathe with 5/8” bowl gouge, Raffan-style spear point tool, Cole jaws, large cone-shaped center, and an electric hand drill. Supplies: 1” x 9-1/2” diameter blank, either solid or laminated. 1 set small Lazy Susan bearings with 8 mounting screws*. White glue EEE Ultra Shine Polish and Shellwax or finish of choice*. Finishing cloth Assorted grits of abrasive paper and sanding discs. |
|
|
| FOAM BALL SANDER | Craft foam, all thread, plain steel rod, and a 3/8” bolt; duct tape and masking tape; heavy duty self adhesive Velcro™ (from WalMart); washers and nuts; abrasive on a scrap backing; 3M #77 spray adhesive; and an abrasive disc. |
|
|
|
|
|
|
©2008, 2007, 2006, 2005, 2004 All American Crafts
Reproduction of the contents of this website or magazine (including images) in any way whatsoever without written permission of the Publisher is strictly prohibited.
ANY unauthorized use of the materials contained within WILL be prosecuted to the fullest extent of the law.
Woodturning Design Magazine is published by All American Crafts, Inc. View our other magazines.