TOOLS NEEDED:
Bowl gouge
Small shear scraper (1/4” mini-cove tool) optional
Spindle roughing gouge
Spindle gouge
1/4” shear spear or pyramid point tool optional
Skew
Foam block
Progressively finer abrasives
Round nose pliers
Non-serrated needle nose pliers
Diagonal cutters

MATERIALS NEEDED:
Ornament
1-3/4” x 1-3/4” x 6” turning square for ornament
Red and Green, 18 or 20 gauge colored copper wire
Jig
3/4” thick 3-1/2” diameter pine disc
3/4” thick 8” diameter pine disc
1-3/4” thick pine for filler pieces
8 each 1-1/2” wood screws for mounting filler pieces
3 each 1-1/4” #8 or #10 wood screws for mounting spindle blanks

Please refer to all manufacturers' labels for proper product usage.

TOOLS NEEDED:
Lathe
Custom tool rest shims (optional)
Calipers
Ruler
carbide scraping tools:
EWT Ci2m – Mini Rougher (Optional)
EWT Ci3m – Mini Finisher (Optional)
EWT Ci4m – Mini Detailer (Optional)

SUPPLIES NEEDED:
Wood: 1 piece – 2" x 2" x 3", Ambonia burl or wood of choice
1-3/8” wood dowel 2” long
1 cork with a 3/8” predrilled hole
Titebond Wood Glue
220 and 320 grit abrasive paper
Deft Gloss Spray Lacquer or finish of choice
3/8” brad point drill bit
Drill chuck for lathe with a 3/8” router adapter

Please refer to all manufacturers' labels for proper product usage.

Tools and supplies available from Woodcraft
Phone: 800-535-4482
www.woodcraft.com

TOOLS NEEDED:
Planer
Jointer
Tablesaw
Drill press with 1/4" brad point drill bit
Ruler
Screw center chuck
Lathe with assorted chisels
Avisera texturing tool (optional)
4-jawed chuck with assorted jaws
Drill motor with 3" Velcro pad

MATERIALS NEEDED:
Wood: 1" x 3-3/4" x 10" cherry--or specie of choice.
Assorted grits of abrasive paper
Watco Danish Oil and satin lacquer--or Finish of choice

SOURCES OF SUPPLY:
Eli Avisera Texturing Tool:
Available in SMALL quantities from Eli at avisera@eli.name

Please refer to all manufacturers’ labels for proper product usage.

TOOLS NEEDED:
1/2” beading and parting tool
3/8” and 1/2” spindle gouges
1/8” fluted parting tool
1/2” skew
1/16” Parting tool
Sorby Recess tool*

SUPPLIES NEEDED:
Suitable hardwood blank: 3-3/4" square x 11-3/4”
8” Crushgrind Shaft mechanism

Suppliers of Crushgrind shaft mechanisms
Craft Supplies USA +1-800-551-8876 www.woodturnerscatalog.com
Packard Woodworks Inc +1-800-683-8876 www.packardwoodworks.com
Rockler Woodworking & Hardware +1-800-279-4441 www.rockler.com
The Woodsmith Ply Ltd (AU +61- (0) 3 9722 9663 www.thewoodsmith.com.au
Woodcut Tools Ltd (NZ) +64 - (0) 6 875 1066 www.woodcut-tools.com
* Constable Woodcrafts +44 (0) 1206 299400 www.peppergrinders.co.uk

Please refer to all manufacturers' labels for proper product usage.

TOOLS NEEDED:
Drill press
Drill bits to suit the size of the electrical connectors
Small square file
Lathe with a 4-jawed chuck and assorted chisels

SUPPLIES NEEDED:
Wood for handle
Various electrical bits and pieces from your friendly electrical supplier
Plastic tube: 1/4" (6mm)
Tufnol or equivalent: approximately 1" x 3/4", (25mm x 19mm) (mine came from an old plastic bag-sealing machine)
Fiberglass tube: 5/8", (16mm) diameter
2 double electrical connectors (1 pulled apart to put in the Tufnol block)
Heavy-duty electrical cable for pen: 42", (1200mm)
Small brass valve and connectors
#8 fencing wire
Some spare air

Please refer to all manufacturers’ labels for proper product usage

TOOLS NEEDED:
Lathe
Bandsaw
Drill press with a drill bit to match screw chuck
Belt sander
Assorted turning chisels
Ruler
Calipers
Cole jaws, jam chuck, or other method of reverse-chucking
Optional: gilding tools, woodburning tools.

SUPPLIES NEEDED:
1 pc. 6" x 6-1/4" x 2-1/2" Block of dyed plywood or other laminated material
Assorted grits of abrasive paper
Finish of choice

SOURCES OF SUPPLY
Dyed Laminated Plywood
Cousineau Wood Products
http://www.cousineauwoodproducts.com/

Rutland Plywood
http://www.rutply.com

3M Spectrum Finishing Papers
http://www.riogrande.com

Gilding Supplies
Easy Leaf Products
http://www.easyleaf.com

The Gold Leaf Company
http://www.goldleafcompany.com

Please refer to all manufacturers’ labels for proper product usage.