Woodturning Design Projects Supply Lists

Issues	Resources	Subscribe	Advertise	Contact Us

Below you will find the supply lists for the projects featured in the Spring 2006 issue of Woodturning Design.

Project Name	Supplies
Laminated Peppermill page 8	Wood: rolling pin blank – one piece 2-5/8" x 2-5/8" x 17" long* Tools: lathe; bandsaw; table saw or compound mitre saw; scroll chuck with dovetail and spigot jaws; Jacob’s chuck; 4-jawed chuck or jam chuck; 3/4" roughing gouge; 3/8" and 1/2" spindle gouge; 1/8" or 3/16" parting tool; 1" skew chisel; round nose scraper; 3/8" beading tool; 1-5/8", 1-1/16", and 7/8" Forstner bits; drill with 1" brad point drill bit; 1/4" twist drill bit; calipers; awl; steady rest (optional); wooden mallet; mandrel Other Supplies: 10" stainless steel deluxe peppermill mechanism, assorted grits of abrasive paper (wet/dry), acetone or mineral spirits, Mylands sanding sealer cut 50/50 with lacquer thinner, Melamine lacquer cut 50/50 with lacquer thinner* or finish of choice, 1" chip brush, 1"-wide blue painter’s tape, tack cloth, marker, pencil Available from Craft Supplies USA, 1287 E 1120 S, Provo, UT 84606; phone: 800-551-8876; website: www.woodturnerscatalog.com; Order: Rolling Pin Blank (No. 186-1150), Peppermill Mechanism (No. 365-0010). *Available from Packard Woodworks, Inc., PO Box 718, Tryon, NC 28782; phone: 800-683-8876; website: www.packardwoodworks.com.

Pen Embellishments Accents for a Cigar Pen page 14	Wood: Bethlehem olive wood – one 5-1/2" blank plus a 1" scrap; scrap board Tools: lathe; collet chuck; 1/4", 5/16", and 3/8" collets; 1/2 ton arbor press or drill press; 3/4" roughing gouge; 1/2" gouge; 1/16" parting tool; digital caliper; 1/4" bolt; “X” and “U” diameter drill bits; pen drilling vise; jam chuck; mandrel rod Other Supplies: Black Chrome Cigar pen kit and bushing set, 3/8" dowel, medium cyanoacrylate glue (CA or superglue) plus accelerator, plastic polish (HUT was used), paper towels, assorted grits of abrasive paper, micro mesh (1500 to 12,000 grits)*, 0000 steel wool, base plate wax or paste wax Available from Bethlehem Olive Wood Imports, 1611 11th Street, Brownwood, TX 76801; phone: 325-646-4440; website: www.bethlehemolivewood.net. Available from The Beall Tool Company, 541 Swans Road NE, Newark, OH 43055; phone: 800-331-4718; website: www.bealltool.com. *Available from Woodturningz, 14943 Redcliff Drive, Noblesville, IN 46060; phone: 888-736-5487; website: www.woodturningz.com.

Very Sharp, Very Easy, Pretty Quick! page 19	Wood: 3/4" plywood, 3/4" pine lumber, construction lumber Tools: lathe with 4-jawed chuck and assorted chisels, table saw, bandsaw, hack saw, drill press with assorted bits, handheld electric drill with assorted bits, metal lathe bit in a Stewart handle, side cutters, V-shaped cutter, roughing gouge, parting tool, wood threading tools (optional), wood chisel, large calipers, file (optional), clamps, vise, hammer, screwdriver, ruler, weights (optional) Other Supplies: medium density fiberboard (MDF); 5/8" pillow block bearings; 5/8" drill rod; four 1/4" x 1-1/2" carriage bolts; 8d duplex nails; assorted screws; motor, switch, 2" pulley, and belt*; spade connectors; abrasive cloth belts; sanding-disk cement; honing compound; assorted grits of abrasive paper; polyurethane glue; dust collector and mask; thin cardboard; permanent marker Available from MSC Industrial Supply Company, 75 Maxess Road, Melville, NY 11747-3151; phone: 800-645-7270; website: www.mscdirect.com; Order: Pillow Block Bearings (No. 88039326) $26.52 x 2, Drill Rod (No. 06000400) $9.14. **Available from Grizzly Industrial, Inc., PO Box 2069, Bellingham, WA 98226; phone: 800-523-4777; website: www.grizzly.com; Order: Motor (No. G2527) $64.95, Switch (No. G8992) $7.95, Pulley (No. G5422) $5.95, Belt (No. G3640) $19.95.

Strawflower Holders page 29	Wood: small pieces of scrap wood including hard wood Tools: lathe, drill press with assorted bits, 1/4" and 1/2" gouge, parting tool, 1/2" skew, sharp chisel, awl, small rattail file, saw, screw chuck (optional) Other Supplies: assorted grits of cabinet paper, paste wax or soap, spray semi-gloss Deft or finish of choice, 0000 steel wool, terry cloth towel, pencil (rounded, sharp)

Initialed Corian Lady’s Compact page 38	Tools: lathe, scroll saw with No. 7 artisan scroll saw blades, drill with assorted bits, diamond hone, direct-reading caliper, 1/2" bowl gouge, small file, putty knife or other flat blade Other Supplies: 1/2"-thick Corian of choice to be cut to a 2-1/4" x 2-1/4" square, compact mirror, Inlace liquid filler and gold metallic dust, double-faced turner’s tape, 3M Spray Mount Adhesive, Hot Stuff Super “T” cyanoacrylate glue (CA or superglue), Pen Finishing Kit PFK-1, Acrylic Scratch Remover ASR-1, software program with attractive fonts (optional), assorted grits of abrasive paper, masking tape, ruler, clean soft towel Available from BG Artforms, 2189 Philip Drive, Bensalem, PA 19020; phone: 888-717-4202 (toll free); website: www.bgartforms.com. *Available from Craft Supplies USA, 1287 E 1120 S, Provo, UT 84606; phone: 800-551-8876; website: www.woodturnerscatalog.com; Order: Compact Mirror (No. 050-7016) or from Penn State Industries, 9900 Global Road, Philadelphia, PA 19115; phone: 800-377-7297; website: www.pennstateind.com; Order: Compact Mirror (No. PKCMRG).

Closed-End Pens page 56	Wood: masur birch pen blank* (1-1/2 blanks needed or 6.5"-long single) (used for pen in this article); other options: afzelia xylay pen blank (1-1/2 blanks needed or 6.5"-long single) from www.beartoothwoods.com or curly bubinga (1-1/2 blanks needed or 6.5"-long single) from ebay or e-mail: thewoodguy1@sympatico.ca Tools: lathe; hack saw; Beall collet chuck with 1/4", 7/16", and 9/16" collets; drill press with 1/4" and 37/64" (recommended) bits; scroll chuck with spigot jaws; pyramid point tool; homemade pin chuck or custom-made (can be ordered by e-mail from SWOODWRKNG@aol.com); 11 mm and 1/8" drill rod* (for homemade pin chuck); conversion pump; 3/4" cutter; small parting tool; assorted files; sharp barrel trimmer; shim tube; quick-grip clamps with soft protectors; calipers; skew; buffing wheel with white diamond Other Supplies: Gentleman’s fountain pen kit or Statesman’s fountain pen kit, second brass tube from another kit (optional), 14K solid gold replacement nib for Gentleman series pens (optional) (e-mail Anthony Turchetta at penworks@turchetta.com), assorted grits of abrasive paper, assorted grits of Abralon or micro mesh, Cyanoacrylate glue (CA or superglue) and accelerator, epoxy glue, Behlens Solarlux alcohol-based aniline dye** or finish of choice, wax, tape Available from Arizona Silhouette, PO Box 11170, Yuma, AZ 85366-9170; phone: 928-329-8039; website: www.arizonasilhouette.com (availability varies). Available from Craft Supplies USA, 1287 E 1120 S, Provo, UT 84606; phone: 800-551-8876; website: www.woodturnerscatalog.com. Available from MSC Industrial Supply Company, 75 Maxess Road, Melville, NY 11747-3151; phone: 800-645-7270; website: www.mscdirect.com. **Available from Woodcraft, PO Box 1686, Parkersburg, WV 26102; phone: 800-225-1153; website: www.woodcraft.com.

“Raised Corn” Blackware Pottery page 66	Wood blank of choice (cherry was used for project shown) Tools: lathe, Oneway live center (very useful), sharp bowl gouge, square end scraper, boring bar system with laser thickness gauge* (optional), parting tool, V-cutting tool, flat palm gouge or rotary tool, Velcro sanding ball (optional), router with straight bit, wax carver (optional), electric drill and sanding discs, palm carver or rotary sanding drum, Kutzall carbide burrs Other Supplies: 1/4" dowel, scrap wood, airbrush, woodburning unit, power carver or simple hand carving tools (knife, shallow gouge, V-tool), stropping system*** with compound and leather, black acrylic paint (Delta Ceramcoat Acrylic was used for project shown), modeling clay (optional), cyanoacrylate glue (CA or superglue), fine sawdust, assorted grits of abrasive paper, lacquer finish and/or finish of choice, spray adhesive, tack cloth, sharp pointed knife, ruler, vacuum, dust mask, and/or fan Available from Keith Clark, 300 NW 18th, Oklahoma City, OK 73103; phone: 405-528-5476; website: www.theokspindoctor.com. Available from Wood Carvers Supply, Inc., PO Box 7500, Englewood, FL 34295; phone: 800-284-6229; website: www.woodcarverssupply.com; To order Burnmaster (woodburning unit) and/or Mastercarver. **Available from Flexcut, 8105 Hawthorne Drive, Erie, PA 16509; phone: 800-524-9077; website: www.flexcut.com.

Decorative Doorstops page 78	Wood: scrap wood (2" x 2" x 13" piece of red oak was used for this project) Tools: table saw, jointer, planer, lathe with live center, ruler, awl, calipers, parting tool, small spindle gouge, detail gouge, skew, finish sander, bandsaw, random orbit sander with 120-grit disc, square, electric drill with 240-grit abrasive disc on a Velcro pad Other Supplies: assorted grits of abrasive paper, linseed oil thinned with paint thinner or finish of choice, spray lacquer (optional), pencil, leather cord (optional)

©2008, 2007, 2006, 2005, 2004 All American Crafts
Reproduction of the contents of this website or magazine (including images) in any way whatsoever without written permission of the Publisher is strictly prohibited.
ANY unauthorized use of the materials contained within WILL be prosecuted to the fullest extent of the law.

Woodturning Design Magazine is published by All American Crafts, Inc. View our other magazines.